| Test
& Measurement Devices |
|||||
![]() |
ISO9001 CE |
TIME
DOMAIN REFLECTOMETER & TONER
CABLE FAULT LOCATOR
6KM
RANGE TDR/TONER WITH AUTO FAULT LOCATION
The TX4000 is a hand held Time Domain Reflectometer with 11 range scales covering the range 0-4000 meters, with a 7 meter first range scale and a 0.5 meter dead zone near and far end faults are clearly displayed on its 128x64 pixel back light Liquid Crystal Display.
The Auto Fault Location key will move the cursor directly to the first event or fault, thus eliminating the need to visually interpret the wave form. When set in manual mode, the wave form may be visually scanned as on conventional TDRs. In both modes the user variable gain covering the range of default to 64 db's may be used to magnify small events identified on the waveform. The scan lock feature will allow the user to hold the trace for closer examination.
Designed for identifying and locating faults on all metallic cables with two or more insulated conductors. The TX4000 has impedance matched circuits for 25, 50, 75 and 100 ohms and with velocity of propergation settings from 1-99% (or the equivalent in feet or meters/micro second) will cover the range of power, data, communication and CCTV cables.
Housed in a rugged IP54 rated ABS enclosure and weighing only 350 grams (12 ounces), the TX4000 is suitable for outside use.
| Ranges @ Vp-70% |
Meters: 7, 15,
30, 60, 120, 250, 500, |
Power Supply | 6v (4 x AA cells) |
| Range Selection | Manual
range control |
Power Down Selectable | 1, 2, 3, 5 minutes or disabled |
| Resolution | Approximately 1% of range |
Backlit Display |
128 x 64 pixels |
| Accuracy | 1% of selected range* | Voltage Detection | 250 volts AC |
| Sensitivity | min
3 pixel return at 4km on 0,6mm, PE, TP |
Storage Temperature |
-20 to 70 deg. C |
| Velocity Factor | Adjustable from 1% to 99% | Operating Temperature | 10 to 50 deg. C |
| Output Pulse | 5v p-p into open circuit | Dimensions | 165 x 90 x 37mm |
| Output Impedance | Selectable 25, 50, 75 and 100 ohms | Weight | 350gms (12oz) |
| Output
Pulse Width |
3ns min to 3ms, automatic range | Water/Dust Proof | IP54 |
| Scan Rate | 2
scans / second or scan held (not on 3km/6km range) |
Safety | IEC61010-1 EN 60950 |
| Tone Generator | 810 - 1110 Hz | EMC | BS/EN61326-1 |
| Battery Life | 60 hours continuous scanning |
*Measurement accuracy of +/-1% assumes
the instrument setting for velocity
of propagation (Vp) of the cable under test to be accurately set, homogeneity
of the Vp along the cable length, and accurate cursor positioning.
All
prices exclude VAT
VAT does not apply to countries outside of the EU as local taxes apply.
Quantity orders are only shipped using a next day parcel service.
TX4000
TIME
DOMAIN REFLECTOMETER & TONER
CABLE FAULT LOCATOR
6KM
RANGE TDR/TONER WITH AUTO FAULT LOCATION
"The
smallest graphical TDR's in the world"
|||
TX2001||||
TX2002 |||
TX2003 |||
TX4000 || FaultCaster
|||| LanCaster
|||| LanCaster
Pro ST|||
CT100|||
|| Input
Devices |||
About ComputerWare
||| Contact
Us |||
Home||
![]()
is
a distributor of Test & Management Equipment
/
Cable
Fault Locators / Time
Domain Reflectometers
and Computer Input Devices
![]()
Contact
us now for further details and prices
all major credit cards accepted
by telephone
Tel:
+44 (0)118 989 2777
Fax: +44 (0)118 977 2168
E-mail:
sales@computerware.co.uk