| Test
& Measurement Devices |
|||||
![]() |
ISO9001 CE |
TIME
DOMAIN REFLECTOMETER & TONER
CABLE FAULT LOCATOR
6KM
RANGE TDR/TONER WITH 1% ACCURACY
The TX2003, 6k (19,000ft) range Time Domain Reflectometer weighing only 350 grams (13oz) fits neatly into the hand. With its 128 x 64 pixel backlight, scratch resistant display, provides accurate and easy to read fault locations on metallic cables. With a 3 nano second pulse, rise time "near end" cable faults can be clearly identified without the need to surpress the transmitted pulse. Housed in a rugged IP54 rated ABS enclosure, the TX2003 is suitable for outside use.
Using pre determined gain and pulse widths for each range setting and with only 4 control buttons, all major operating and setting parameters can be easily accessed. A 6km cable run can be scanned in seconds, allowing the operator a view of the cable run, yet arriving quickly to the fault. By using the TX2003 scan lock facility, the cable can be continually scanned or the trace held for closer analysis. To enable the TX2003 to test all metallic cables, four user selectable output impedances are provided 25, 50, 75 & 100 ohms.
Faulty cables may be traced using the TX2003 warble tone feature, an oscilating tone is injected into the suspect power or transmission line and by using a commercially available tone tracing probe, the suspect line can be identified.
| Ranges @ Vp-70% |
Meters: 7, 15,
30, 60, 120, 250, 500, |
Power Supply | 6v (4 x AA cells) |
| Range Selection | Manual
range control |
Power Down Selectable | 1, 2, 3, 5 minutes or disabled |
| Resolution | Approximately 1% of range |
Backlit Display |
128 x 64 pixels |
| Accuracy | 1% of selected range* | Voltage Detection | 250 volts AC |
| Sensitivity | min
3 pixel return at 4km on 0,6mm, PE, TP |
Storage Temperature |
-20 to 70 deg. C |
| Velocity Factor | Adjustable from 1% to 99% | Operating Temperature | 10 to 50 deg. C |
| Output Pulse | 5v p-p into open circuit | Dimensions | 165 x 90 x 37mm |
| Output Impedance | Selectable 25, 50, 75 and 100 ohms | Weight | 350gms (12oz) |
| Output
Pulse Width |
3ns min to 3ms, automatic range | Water/Dust Proof | IP54 |
| Scan Rate | 2
scans / second or scan held (not on 3km/6km range) |
Safety | IEC61010-1 EN 60950 |
| Tone Generator | 810 - 1110 Hz | EMC | BS/EN61326-1 |
| Battery Life | 60 hours continuous scanning |
*Measurement accuracy of +/-1% assumes
the instrument setting for velocity
of propagation (Vp) of the cable under test to be accurately set, homogeneity
of the Vp along the cable length, and accurate cursor positioning.
TX2003 Package
Contents
The TX2003 comes complete
with tool-belt holster and croc clip adaptor.
All
prices exclude VAT
VAT does not apply to countries outside of the EU as local taxes apply.
Quantity orders are only shipped using a next day parcel service.
TX2003
TIME
DOMAIN REFLECTOMETER & TONER
CABLE FAULT LOCATOR
6KM
RANGE TDR/TONER WITH 1% ACCURACY
"The
smallest graphical TDR's in the world"
|||
TX2001||||
TX2002 |||
TX2003 |||
TX4000 || FaultCaster
|||| LanCaster
|||| LanCaster
Pro ST|||
CT100|||
|| Input
Devices |||
About ComputerWare
||| Contact
Us |||
Home||
![]()
is
a distributor of Test & Management Equipment
/
Cable
Fault Locators / Time
Domain Reflectometers
and Computer Input Devices
![]()
Contact
us now for further details and prices
all major credit cards accepted
by telephone
Tel:
+44 (0)118 989 2777
Fax: +44 (0)118 977 2168
E-mail:
sales@computerware.co.uk